Set up Auto/Scene Composition Glossary Program mode Exposure

Photography for beginners
[ begin ]

Understanding resolution (ii)

Ignore DPI, PPI etc until you come to printing.  Some people worry about what PPI (Pixels per inch) they should use for their images, they don't need to.  There are even Digital competitions where they specify what PPI the images must be submitted with.  This is nonsense.  A pixel is a pixel and has no size until it is made physical to display it, either shown on a computer screen or projected on to a large screen.  If it is shown on a phone the pixels will be very tiny and the PPI will be large number.  If it is projected on a 10 foot wide screen, the pixels will be about 1/12" and the PPI will be around 12, note this is not the 72 PPI they usually ask for.  Printing is another matter and here PPI is important as it determines the size of the print; but it gets complicated as there is also DPI (dots per inch) and many printers print several dots per pixel.  So we will forget all about inches (or cms) for now.  Digital images are measured in pixels which have no size, but are notional.

Digital cameras capture a picture on a sensor, (which we will cover later - for now think of the sensor as a grid of photo-cells each registering how much light is falling on it), and store an image as an array of numbers (pixel values) in the camera's memory, (or on a memory card) and are later copied to the memory of another digital device (e.g. phone or computer).  Cameras vary in the size and format of the picture they take, but typically it might be a 4x3 aspect ratio, and be 4000 pixels wide and 3000 pixels deep.  This is a total of 12,000,000 pixels in the image, and so such a camera would be known as a 12 mega-pixel camera.

Computer and laptop screens used to be only 1024 x 768 pixels (assuming 4x3) but are generally now wide screen, maybe 1920 pixels wide.  Screen resolutions for TVs and computers is a complex subject with many standards with confusing names.  This wikipedia article has a lot of explanation (and further links to TV displays and computer screens) if you want to know more.

The viewing screen on the back of a camera, if you have one viewfinder, is even smaller; on a DSLR maybe 640 x 480, a compact is only maybe 320 x 240.  Tablets are better, but you can not see the full quality of the image from your modern camera, even on a computer with a large display, unless you print it, and even then you may need to print at A3 or larger.  Remember what you see on the screen is a reduced (by the software) image so that it fits the screen and you can see it all, but not the detail.  To see this you have to use the "display actual pixels" option (or the equivalent depending on your software), or enlarge to 100%.  But then you can only see a portion of your image at a time, and you need to scroll around to see the whole image.

[ next ]