|
Auto
There are many things to take care of when taking a photograph. There is the light; from bright sunshine to candle lit dinners. This is an enormous range which the human eye can almost cope with; we may need sun glasses to help, or have to wait for our eyes to adapt if we come in to a dark room. The camera can only cope with a much smaller range and so we have to work out and set exposures. Again our eyes, until we get old, can focus on things in the distance or things near to. Something else that needs setting on the camera. There are lots of other things like depth of field, freezing motion or getting blur for speed, etc.. These are all things we will learn in time, but to start with you use AUTO and let the camera work all that out, and you just concentrate on two things:-
- Where to point the camera
- When to press the shutter
In fact, if you have zoom, and most do nowadays, there is also framing. However there is quite a bit to say about that, so I will devote a whole topic to it and come back to it later.
Now when you look at a scene you recognise things such as trees, water, fields, sky, etc.. Or you recognise a group of people and maybe even know some of them. The camera only sees a lot of pixels. some are similar to their neighbours, some are quite different. Now the software has to examine these pixels and work out as best it can what on earth it is that you are taking a picture of and what settings should it use. It can measure the light and allow for that, and fortunately, using its computer it can make a histogram of the image to help it, (and you too as we shall see later). Then it has to focus the camera, it can move the lens elements in and out and see what happens to the pixels. When it finds a position of maximum contrast it will settle for that. Fortunately it has a very fast computer as it has to do all this as you press the button. If you think about this, it is a wonder it works at all. It is no wonder that sometimes it gets it wrong, but when it does we can help with the scene modes. These tell it what sort of picture we are trying to take. By the way, click on the pixels to see where that part image came from.
Some cameras have two auto modes, Auto and intelligent auto. I am not going to talk about these separately apart from this brief explanation. Not all manufacturers have adopted this distinction and there are no standards over where the dividing line should be between them. If you do have these two settings, refer to your camera documentation for what they are, and how to use them. Usually, if you have two settings, the more basic AUTO does the traditional things like exposure determination, auto focus, white balance evaluation etc. and Intelligent AUTO examines the scene and tries to determine and use one of the Scene modes. which also use AUTO functions but with biases.
|